Windshield Washer Nozzle Cleaning

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Clean the washer nozzle by inserting and moving a needle or an equivalent tool back and forth.
- If the nozzle becomes clogged again after cleaning, remove the hose from washer nozzle. Make sure there is enough washer fluid. Then turn the washer switch on and flush the inside of the hose.
  
  Fig 1: Cleaning Washer Nozzle Using A Needle
  Courtesy of MAZDA MOTORS CORP.