Rear Washer Nozzle Removal/Installation [5-Door, Sport Wagon]
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON] .)
- Remove the high-mount brake light (In-vehicle-type). (Sport Wagon)
- Remove the rear washer hose from the rear washer nozzle.
- Squeeze the tabs of the rear washer nozzle.
- Pull the rear washer nozzle out to remove it.
- Install in the reverse order of removal.
- Adjust the rear washer nozzle. (See REAR WASHER NOZZLE ADJUSTMENT [5-DOOR, SPORT WAGON] .)