LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 386 (Lighting System) >> Vanity Mirror Illumination Bulb Removal/Installation >> Lens Removal Note

Lens Removal Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a tape-wrapped flathead screwdriver into the service hole, and pry the screwdriver in the direction indicated by the arrow to remove the lens.
    Fig 1: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole
    G03645612Courtesy of MAZDA MOTORS CORP.