Door Lock Actuator
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the front door lock actuator connector.
- Apply battery positive voltage to the front door lock actuator terminals and inspect the front door lock actuator operation.
- If not as specified, replace the front door lock actuator.
Courtesy of MAZDA MOTORS CORP.
ACTUATOR OPERATION SPECIFICATIONActuator operation Connection GND B+ Lock A (F) (1) B (E) (1) Unlock A (F) (1) B (E) (1) (1) () : RH