Front Tilt Motor Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the front tilt motor connector.

Apply battery positive voltage to the front tilt motor terminals and inspect the front tilt motor operation

If not as specified, replace the front tilt motor.

MOTOR OPERATION CHART

Motor operation	Connection
Motor operation	B+	GND
Up	A	B
Down	B	A

Fig 1: Front Tilt Motor Circuit Diagram And Connector Terminals

Courtesy of MAZDA MOTORS CORP.