LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 381 (Body Panels) >> Stay Damper Disposal

Stay Damper Disposal

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The gas in the stay damper is colorless, odorless, and non-toxic.
  1. Wear protective eye wear.
  2. Lay the stay damper flat.
  3. Saw through the stay damper body using a hacksaw.
  4. Allow the gas to escape from the stay damper.
  5. Discard the stay damper.
    Fig 1: Sawing Through Stay Damper For Disposal
    G03645245Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals