Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
Measure the gap and height difference between the fuel-filler lid and the body.
Clearance

a: 2.0-4.0 mm {0.079-0.15 in}

b: -1.5-0.5 mm {-0.06-0.019 in}
Tighten the bolts.

Fig 1: Measuring Gap And Height Difference Between Fuel-Filler Lid And Body
Courtesy of MAZDA MOTORS CORP.