LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 380 (On-Board Diagnostic (Multiplex Communication System)) >> Procedures For Determining The Location Of A Malfunction >> Instrument Cluster

Instrument Cluster

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access and monitor the "ABS_MSG", "PCM_MSG" and "TCM_MSG" of PID using the SST  (WDS or equivalent).
  2. Referring to the PID/DATA MONITOR, confirm the display status of the PID. (See PID/DATA MONITOR TABLE [MULTIPLEX COMMUNICATION SYSTEM]  .)
  3. Referring to the following table, determine the malfunctioning part of the CAN system.
MALFUNCTION LOCATION SPECIFICATION CHART

Module Communication status Malfunction location
PCM ABS/TCS HU/CM TCM
Instrument cluster (2) (2) (2)
  • Wiring harness E
  • Instrument cluster
(2) (1) (1)
  • Wiring harness A
  • PCM
(1) (2) (1)
  • Wiring harness B
  • ABS/TCS HU/CM
(2) (2) (1)
  • Wiring harness C
(1) (1) (2)
  • Wiring harness D
  • TCM
(1) Normal
(2) Communication error
scientia non olet · About LEMON Manuals