LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 379 (Seat Belt System) >> Child Restraint Seat Anchor Removal/Installation [Sedan]

Child Restraint Seat Anchor Removal/Installation [Sedan]

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover.
  2. Remove the bolt and child restraint seat anchor.
    Fig 1: Removing Child Restraint Seat Anchor (Sedan) (Torque Specs)
    G03645207Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.