LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Vehicle Speedometer Sensor (VSS) Inspection (Without Abs) >> Sensor Rotor Inspection

Sensor Rotor Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the VSS. (See VEHICLE SPEEDOMETER SENSOR (VSS) REMOVAL/INSTALLATION (WITHOUT ABS) .)
  2. Shift the selector lever to N position.
  3. Inspect sensor rotor surface via VSS installation hole while rotating the front tire manually.
    1. Is sensor rotor free of damage and cracks?
    2. Is sensor rotor free of any metallic shavings or particles?
      • If sensor rotor is okay, replace the VSS.
      • If there is a problem, clean or replace the sensor rotor.
scientia non olet · About LEMON Manuals