LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Automatic Transaxle Removal/Installation >> No. 1 Engine Mount Bracket Removal Note

No. 1 Engine Mount Bracket Removal Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the engine using the SST  before removing the No. 1 engine mount.
    Fig 1: Supporting Engine
    G03644734Courtesy of MAZDA MOTORS CORP.
  2. Remove the No. 1 engine mount.
scientia non olet · About LEMON Manuals