Diagnostic procedure
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NO. 6 LOW MAXIMUM SPEED AND POOR ACCELERATION [AW6A-EL] DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 |
|
Yes | Go to the next step. |
| No | Go to No. 27 "NO. 27 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE ", or No. 28 "NO. 28 GEAR POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE OR P, N, R POSITIONS ". | ||
| 2 |
|
Yes | Go to the next step. |
| No | Repair or replace any malfunctioning parts according to the inspection results. | ||
| 3 |
|
Yes | Go to the next step. |
| No | Inspect the coupler component. If normal, replace the control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION .) |
||
| 4 |
|
Yes | Inspect the ATF condition.
|
| No | Replace the torque converter. | ||
| 5 |
|
||