Disc Pad Thickness Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Jack up the front of the vehicle and support it with safety stands.
Remove the wheel and tires.
Verify the remaining thickness of the pads.
Minimum thickness

2.0 mm {0.079 in} min.

Fig 1: Inspecting Disc Pad Thickness
Courtesy of MAZDA MOTORS CORP.
Replace the pads as a set: right and left wheels, if either one is at or less than the minimum thickness.