LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Joint Shaft Removal/Installation [AJ] >> Drive Shaft And Joint Shaft Installation Note

Drive Shaft And Joint Shaft Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply ATF to the oil seal lip.
  2. Push the drive shaft and joint shaft into the transaxle.
    CAUTION:
    • The sharp edges of the joint shaft can slice or puncture the oil seal. Be careful when installing the joint shaft to the transaxle.
scientia non olet · About LEMON Manuals