LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Joint Shaft Disassembly/Assembly [L3] >> Dust Seal (Differential Side) Assembly Note

Dust Seal (Differential Side) Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new dust seal (differential side) using a steel plate and the SSTs. 
    Fig 1: Installing New Dust Seal (Differential Side) Using Steel Plate And SST
    G03644389Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals