LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Joint Shaft Assembly [AJ] >> Dust Seal (Drive Shaft Side) Assembly Note

Dust Seal (Drive Shaft Side) Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new drive shaft side dust seal using the SSTs  and a press.
    Fig 1: Installing New Drive Shaft Side Dust Seal Using SSTs And Press
    G03644397Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals