LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Joint Shaft Assembly [AJ] >> Dust Seal (Differential Side) Assembly Note

Dust Seal (Differential Side) Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new differential side dust seal using a press, steel plate and the SST  .
    CAUTION:
    • Do not damage the rubber part of the dust cover.
    Fig 1: Installing New Differential Side Dust Seal Using Press, Steel Plate And SST
    G03644396Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals