LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Drive Shaft Removal/Installation [L3] >> Drive Shaft Installation Note >> Left side

Left side

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the drive shaft into the wheel hub.
  2. Apply transaxle oil to the oil seal lip.
  3. Push the drive shaft into the transaxle.
  4. After installation, pull the transaxle side outer ring forward to confirm that the drive shaft is securely held by the clip.
scientia non olet · About LEMON Manuals