LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Drive Shaft Disassembly/Assembly [ATX] >> Outer Ring Disassembly Note

Outer Ring Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the outer ring and the shaft for proper assembly.
    Fig 1: Marking Outer Ring And Shaft For Proper Assembly
    G03644418Courtesy of MAZDA MOTORS CORP.
  2. Remove the clip.
  3. Remove the outer ring.
    Fig 2: Removing Outer Ring
    G03644419Courtesy of MAZDA MOTORS CORP.