LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Drive Shaft Disassembly/Assembly [ATX] >> Dynamic Damper Assembly Note

Dynamic Damper Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the dynamic damper as shown in the figure.

    Standard length 287.7-293.7 mm {11.33-11.56 in} 

    Fig 1: Installing Dynamic Damper
    G03644423Courtesy of MAZDA MOTORS CORP.
  2. Install the new boot band onto the dynamic damper.