LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Drive Shaft Disassembly/Assembly [ATX] >> ABS Sensor Rotor (With ABS) Disassembly Note

ABS Sensor Rotor (With ABS) Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not remove the sensor rotor unless it is necessary.
  • Do not reuse the sensor rotor if removed.
  1. Tap the ABS sensor rotor off the drive shaft using a chisel.
    Fig 1: Taping ABS Sensor Rotor Off Drive Shaft Using Chisel
    G03644422Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals