LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Drive Shaft) >> Drive Shaft Disassembly/Assembly [ATX] >> ABS Sensor Rotor (With ABS) Assembly Note

ABS Sensor Rotor (With ABS) Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set a new ABS sensor rotor on the drive shaft and press it on using the SSTs. 
    Fig 1: Setting New ABS Sensor Rotor On Drive Shaft
    G03644424Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals