LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Front Suspension System) >> Front Upper Arm Removal/Installation >> Front Upper Arm Ball Joint Removal Note

Front Upper Arm Ball Joint Removal Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the knuckle using the jack.
  2. Separate the ball joint from the knuckle using the SST. 
    Fig 1: Separating Front Upper Ball Joint From Knuckle
    G03644278Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals