LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Front Suspension System) >> Front Shock Absorber Inspection

Front Shock Absorber Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front shock absorber from the vehicle.
  2. Inspect for damage and oil leakage.
  3. Inspect the rubber bushing for deterioration and wear.
  4. Compress and extend the shock piston at least three times. Verify that the operational force does not change and that there is no unusual noise.
    • If not as specified, replace the shock absorber.
      1. Compress the shock absorber piston and release it.
      2. Verify that the piston extends fully at a normal speed.
scientia non olet · About LEMON Manuals