Front Lower Arm (Rear) Bushing Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Mark the new bushing as shown in the figure.

Fig 1: Marking New Bushing
Courtesy of MAZDA MOTORS CORP.
Press the bushing in to the marking using the SSTs.

Fig 2: Pressing Bushing In To Marking
Courtesy of MAZDA MOTORS CORP.
Verify that clearance distance A-B is 23.75- 25.75 mm {0.936-1.013 in}.

Fig 3: Identifying Clearance Distance A-B
Courtesy of MAZDA MOTORS CORP.