LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (Engine Control System (L3)) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the following procedure to making the working space.
    1. Remove the Front wheel (RH).
    2. Remove the splash shield.
  2. Disconnect the CKP sensor connector.
  3. Remove the installation bolts to remove the CKP sensor.
scientia non olet · About LEMON Manuals