No Shift To 4th Gear
WARNING: This page is about a different car, the 2002 Mazda 626 and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
See TRANSAXLE WILL NOT SHIFT . Transaxle may be operating in FAIL-SAFE MODE due to: TFT sensor failure, transaxle range switch malfunction, TCC solenoid valve malfunction, O/D OFF switch malfunction, torque converter malfunction, faulty control valve body, open or short in wiring, poor connection at sensors and/or PCM malfunction.