LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Exhaust System (L3)) >> Exhaust System Removal/Installation >> Exhaust Manifold Insulator (Lower) Installation Note

Exhaust Manifold Insulator (Lower) Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the exhaust manifold insulator (lower) installation bolts in the order shown.
    Fig 1: Identifying Exhaust Manifold Insulator (Lower) Bolt Tightening Order
    G03643965Courtesy of MAZDA MOTORS CORP.
  2. Verify that the insulator is installed as shown.
    Fig 2: Verifying Insulator Installation
    G03643966Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals