Visual Inspection
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that no DTCs related stored to the TP or APP sensors have been stored.
- If any DTCs have been stored, perform the applicable DTC inspection. (See DTC TABLE .)
- Remove the air hose from the throttle body. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION .)
- Turn the ignition switch to the ON position.
- Operate the accelerator pedal and verify that the throttle valve opens and closes in accordance with the pedal movement.
- If it cannot be verified, perform the "Continuity Inspection".