LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Engine Mechanical (Service Information AJ)) >> Timing Chain Removal/Installation >> Crankshaft Pulley Lock Bolt Removal Note

Crankshaft Pulley Lock Bolt Removal Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor with the pipes still connected.
  2. Hold the crankshaft pulley using the SSTs  .
    Fig 1: Removing A/C Compressor With Pipes Still Connected
    G03643700Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals