No. 4 Engine Mount Bracket Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Secure the engine and the transaxle using an engine jack and attachment as shown.

Fig 1: Securing Engine And Transaxle
Courtesy of MAZDA MOTORS CORP.

Tighten the No. 4 engine joint bracket bolts and nuts in the order shown.

ENGINE JOINT BRACKET BOLTS AND NUTS TIGHTENING TORQUE

Bolt and nut No.	Tightening torque (N.m {kgf.m, ft.lbf})
1, 2, 3	66.6-93.1 {6.8-9.4, 49.2-68.6}
4	85.3-116.6 {8.7-11.8, 63.0-85.9}

Fig 2: Tightening Order Of No. 4 Engine Joint Bracket Bolts And Nuts

Courtesy of MAZDA MOTORS CORP.