LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Engine Mechanical (Service Information L3)) >> Front Oil Seal Replacement >> Front Oil Seal Installation Note

Front Oil Seal Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to the oil seal lip.
  2. Push the oil seal slightly in by hand.
  3. Tap the oil seal in evenly using the SST  and a hammer.
    Fig 1: Installing Oil Seal Using SST
    G03643652Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Oil Seal Installation Depth
    G03643653Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals