LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Engine Mechanical (Service Information L3)) >> Drive Belt Inspection >> Front Drive Belt

Front Drive Belt

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the drive belt auto tensioner indicator mark does not exceed the limit.
    • If it exceeds the limit, replace the drive belt. (See DRIVE BELT REPLACEMENT .)
      Fig 1: Identifying Drive Belt Auto Tensioner Indicator Mark
      G03643599Courtesy of MAZDA MOTORS CORP.