Diagnostic procedure
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NO. 22 VIBRATION CONCERNS (ENGINE) [AJ] DIAGNOSTIC PROCEDURE
| STEP |
INSPECTION |
ACTION |
| 1 |
- Inspect the following components for loose attaching bolts or worn parts:
- Cooling fan
- Condenser fan
- Drive belt and pulleys
- Engine mounts
- All items okay?
|
Yes |
Inspect the following systems:
- Wheels
- ATX
- Driveline
- Suspension
|
| No |
Readjust or retighten engine mount installation position. Service if necessary for other parts. |
| 2 |
- Verify test results.
- If okay, return to diagnostic index to service any additional symptoms.
- If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
- If vehicle is repaired, troubleshooting completed.
- If vehicle is not repaired or additional diagnostic information is not available, reprogram PCM if later calibration is available. Retest.
|