SUNVISOR Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the screw, then the sunvisor.

Fig 1: Removing Sunvisor Screw
Courtesy of MAZDA MOTORS CORP.
Disconnect the vanity mirror illumination connector.
Disengage the center adapter (sunvisor stopper) from the body using a fastener remover.

Fig 2: Disengaging Center Adapter
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.