LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Interior Trim) >> Interior Trim >> Meter Hood Removal/Installation

Meter Hood Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws.
    Fig 1: Removing Meter Hood Screw
    G03161928Courtesy of MAZDA MOTORS CORP.
  2. Pull the meter hood outward, then detach the column cover.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals