Glove Compartment Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the damper clip.
Bend the stoppers inward to remove.

Fig 1: Removing Glove Compartment
Courtesy of MAZDA MOTORS CORP.
Open the glove compartment lid until it is completely horizontal and remove the clips by pulling them in the direction of the arrow.

Fig 2: Removing Clips
Courtesy of MAZDA MOTORS CORP.
Remove the glove compartment.
Install in the reverse order of removal.