LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Interior Trim) >> Interior Trim >> B-Pillar Lower Trim Removal/Installation

B-Pillar Lower Trim Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front scuff plate.
  2. Remove the rear scuff plate.
  3. Pull the area marked A, then remove one side of the B-pillar lower trim.
    Fig 1: Removing Pin From B-Pillar Lower Trim
    G03161937Courtesy of MAZDA MOTORS CORP.
  4. Pull the B-pillar lower trim, then remove the pin from the body.
  5. Remove the B-pillar lower trim.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals