LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Body Panels) >> Body Panels >> Fuel-Filler Lid Adjustment

Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
  2. Measure the gap and height difference between the fuel-filler lid and the body.
    Fig 1: Measuring Gap And Height Difference Between Fuel-Filler Lid And Body
    G03161795Courtesy of MAZDA MOTORS CORP.
  3. Tighten the bolts.
scientia non olet · About LEMON Manuals