LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Body Panels) >> Body Panels >> Bumper >> Rear Bumper Reinforcement Removal/Installation

Rear Bumper Reinforcement Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear bumper.
  3. Remove in the order indicated in the table.
    Fig 1: Rear Bumper Reinforcement Removal Sequence
    G03161815Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals