LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Body Panels) >> Body Panels >> Bumper >> Front Bumper Removal/Installation >> Front Bumper Removal Note

Front Bumper Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the front bumper ends (wheel arch) outward to disengage from the bumper slider.
    Fig 1: Disengaging Bumper Slider
    G03161809Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • If only one side of the front bumper is disengaged from the bumper slider and the bumper falls, it could be damaged. When disengaging the front bumper from the slider, secure the bumper so that it does not fall.
  2. Remove the front bumper from the body.
scientia non olet · About LEMON Manuals