Section 32 (Manual A/C-Heater Systems - HVAC): Specifications

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

SPECIFICATIONS

Application

Specification

Compressor Type

Nippondenso 10-Cyl.

Compressor Belt Deflection

⁽¹⁾

Compressor Clutch Clearance

0.014-0.025" (0.35-0.65 mm)

Compressor Oil Capacity

⁽²⁾ 5.4 ozs.

Refrigerant (R-134a) Capacity

With Rear A/C

30.0 ozs.

Without Rear A/C

22.9 ozs.

System Operating Pressures ⁽³⁾

High Side

205-250 psi (14.4-17.5 kg/cm)

Low Side

18-26 psi (1.2-1.8 kg/cm)

⁽¹⁾	Drive belt tension is maintained by automatic tensioner. No adjustment is necessary.

⁽²⁾	Use ND-Oil 8 (PAG) refrigerant oil.

⁽³⁾	Specification is with ambient temperature at 77°F (25°C), relative humidity at 50-70 percent and engine speed at 1500 RPM.