LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Manual A/C-Heater Systems - HVAC) >> Removal & Installation >> Front A/C Unit Disassembly/Assembly >> Front Evaporator Assembly Note

Front Evaporator Assembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. When assembling a new front evaporator, add a supplemental amount of ND-OIL8 compressor oil from the inlet.

    Supplemental Amount (Approximate Quantity) 

    40 ml (40 cc, 1.4 fl oz)