LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Controls - Trouble Shooting - With & Without Codes) >> On-Board Diagnostic Tests - WDS >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure

Pending Trouble Code Access Procedure

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection. Hook-up the WDS or equivalent Tester to the vehicle.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
    Fig 1: Identifying DLC-2 16-Pin Connector
    G01898252Courtesy of FORD MOTOR CO.
  3. Retrieve PENDING TROUBLE CODES  by WDS or equivalent.