LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Controls - Trouble Shooting - With & Without Codes) >> Canister Vent Solenoid Closing Procedure

Canister Vent Solenoid Closing Procedure

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The canister vent solenoid must not be energized for more than nine minutes at one time. Once the canister vent solenoid is energized and de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in the diagnostics, causing unnecessary repairs.
  1. Connect the WDS or equivalent Tester and select the output test mode.
  2. Select the EVAPCU PID.
  3. Select the ALL OFF mode.
  4. Close the canister vent solenoid by pushing the START button on the WDS or equivalent Tester.
scientia non olet · About LEMON Manuals