LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Lighting Systems) >> Rear Lamp Assembly >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Lamp Assembly
G01904137Courtesy of MAZDA MOTORS CORP.
  1. Remove the rear lamp assembly.
    1. Remove the bolts.
    2. Using a flat tipped screwdriver covered with a rag, gently pry the lamp from the edge of the quarter panel at the bottom portion, and then the top portion.
    3. Disconnect the electrical connectors.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals