LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Security System And Locks System) >> Interior Door Handle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. For additional information, refer to FRONT DOOR TRIM PANEL , or REAR DOOR TRIM PANEL .
  2. Position the watershield aside.
    Fig 1: Removing Interior Door Handle
    G01903986Courtesy of MAZDA MOTORS CORP.
  3. Remove the interior door handle.
    1. Release the clip.
      Fig 2: Removing Door Latch Cable
      G01903987Courtesy of MAZDA MOTORS CORP.
  4. Remove the door latch cable.
    1. Disconnect the cable conduit.
    2. Remove the door latch cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals