LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Seats) >> Rear Seat Backrest Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat backrest. For additional information, refer to 09-13 REAR SEAT BACKREST - SPLIT BENCH  , or REAR SEAT BACKREST - BENCH  .
    Fig 1: Removing Rear Seat Backrest Side Trim Panel
    G01903941Courtesy of MAZDA MOTORS CORP.
  2. Remove the rear seat backrest side trim panel.
    Fig 2: Removing Rear Seat Backrest Latch
    G01903942Courtesy of MAZDA MOTORS CORP.
  3. Remove the rear seat backrest latch.
    1. Remove the bolt.
    2. Remove the nut.
    3. Remove the latch.
  4. To install, reverse the removal procedure.