LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Body Panels) >> Rear Bumper >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper cover. For additional information, refer to REAR BUMPER COVER  .
    Fig 1: Removing Rear Bumper
    G01903388Courtesy of MAZDA MOTORS CORP.
  2. Remove the rear bumper.
    1. Remove the four rear bumper nuts (two each side).
    2. Remove the rear bumper.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals