LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Removal, Overhaul & Installation) >> Supercharger >> LYSHOLM Compressor (MILLENIA 2.3L) >> Removal

LYSHOLM Compressor (MILLENIA 2.3L): Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dynamic chamber cover. Remove charge air cooler air duct and air cleaner assembly. Remove fresh air duct and connecting air duct. Remove mass airflow sensor and air intake hose.
  2. Remove air resonator. Remove right and left air charge air coolers with connecting hoses (if needed) from air intake pipe assembly. Disconnect accelerator cable. Remove EGR valve. Disconnect vacuum lines and harness connector from air intake pipe assembly. Remove air intake pipe assembly.
  3. Remove charge air cooler pipe from intake manifold. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Disconnect fuel line. Remove fuel rail assemblies. See FUEL RAILS & INJECTORS . Disconnect coolant hose. Remove intake manifolds. Remove throttle body from compressor. Loosen and remove drive belt. Remove Lysholm compressor.
scientia non olet · About LEMON Manuals